Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
14.4 AT+STKENV
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 372 of 513
14.4 AT+STKENV USAT Envelope Command
AT+STKENV allows to send an envelope command from the ME or TE to the USIM Application. 
Syntax

Parameter Description
Decimal code that specifies the envelope command.
211 Menu selection
214 Event download
Item identifier
Optional parameter for <Event>= 08 Browser termination
0 User termination
1 Error termination
Optional parameter for <EnvCmd> 211
0 Help is requested
1 Help is not requested
Test Command
AT+STKENV=?
Response(s)
+STKENV:(list of supported <EnvCmd>s)
OK
Write Command
Menu Selection
AT+STKENV=211,<ItemId>[, <Help>]
Response(s)
OK
ERROR
+CME ERROR: <err>
Write Command
Event download
AT+STKENV=214,<Event>[, <Cause>]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN  Last
± + -
<EnvCmd>
(num)
<ItemId>
(num)
<Cause>
(num)
<Help>
(num)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English