Gemalto Cinterion EHS6 - 17. Java related Commands; 17.1 AT^SJAM Manage Java Application

Cinterion
®
EHS6 AT Command Set
17. Java related Commands
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 410 of 513
17. Java related Commands
This chapter describes the AT commands related to Java applications processed by the EHS6.
17.1 AT^SJAM Manage Java Application
The AT^SJAM write command manages the Java applications.
Syntax

Test Command
AT^SJAM=?
Response(s)
^SJAM:(list of supported <action>s), (max. string length of <midlet-url>s), (max. string length of
<upwd>s)
OK
Write Command
AT^SJAM=<action>[, <midlet-url>, <upwd>]
Response(s)
For AT^SJAM=0 till 3
OK
If not successful:
ERROR
+CME ERROR: <err>
For AT^SJAM=4
[^SJAM:<midlet-url>, <midlet-name>, <midlet-vendor>, <midlet-version>, <midlet-
autostart>, <midlet-suite-size>, <record-store-size>]
[^SJAM:<midlet-url>, <midlet-name>, <midlet-vendor>, <midlet-version>, <midlet-
autostart>, <midlet-suite-size>, <record-store-size>]
[^SJAM:... ]
For AT^SJAM=5
[^SJAM:<midlet-url>, <midlet-name>, <midlet-vendor>, <midlet-version>, <midlet-
autostart>]
[^SJAM:<midlet-url>, <midlet-name>, <midlet-vendor>, <midlet-version>, <midlet-
autostart>]
[^SJAM:... ]
OK
If not successful:
ERROR
+CME ERROR: <err>
PIN  Last Reference(s)
- + - Cinterion