Gemalto Cinterion EHS6 - 7.21 ATS6 Set pause before blind dialing

Cinterion
®
EHS6 AT Command Set 
7.21 ATS6
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 161 of 513
7.21 ATS6 Set pause before blind dialing
ATS6 is implemented for compatibility reasons only, and has no effect. 
Syntax

Parameter Description
000
(P)
...255


Notes
•Command ATS6 is dummy, and has no effect on module behavior.
• Read command will return value written by user or default value n=0.
• Write command will return OK or ERROR. OK - when parameter <n> is in range, ERROR otherwise.
• Despite OK returned in case of any parameter from range, no changes will be made.
• Parameter is volatile.
Read Command
ATS6?
Response(s)
<n>
OK
Write Command
ATS6=<n>
Response(s)
OK
ERROR
PIN  Last Reference(s)
- + - ITU-T V.250 [16]
<n>
(num)(&V)(&W)