Cinterion
®
EHS6 AT Command Set
17.6 AT^SJRA
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 423 of 513
17.6 AT^SJRA Run Java Application
The AT^SJRA write command launches the Java application. The command is deprecated for ME and only pro-
vided for reasons of compatibility. Keep in mind that AT^SJRA command performs automatic deinstallation of the
application. That means that if the application was installed via the AT^SJAM command and then run via the
AT^SJRA then, at the end, the application will be automatically removed. Therefore the two commands AT^SJAM
and AT^SJRA are mutually exclusive.
Syntax
Parameter Description
Path of the Java application
The application name must be given as a fully qualified pathname (a:/.../...) to the jad file containing the desired
application.
The local flash file system is identified by: A:. Directory separator is ''/'' (002Fh).
Example: A:/java/jam/example/helloworld/helloworld.jad
Note
• If the module was powered off before the MIDlet exits normally, the MIDlet will not be automatically dein-
stalled.
Test Command
AT^SJRA=?
Response(s)
("IMlet path")
Write Command
AT^SJRA=<appName>
Response(s)
OK
If not successful:
ERROR
+CME ERROR: <err>
PIN Last
- + -
<appName>
(str)
To Next Page
Loading...
Need help?
General
