Cinterion
®
EHS6 AT Command Set
12.14 AT+CSCA
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 343 of 513
12.14 AT+CSCA SMS Service Center Address
Write command updates the SMSC address, through which mobile originated SMs are transmitted. In text mode,
setting is used by send and write commands. In PDU mode, setting is used by the same commands, but only
when the length of the SMSC address coded into the <pdu> parameter equals zero.
Syntax
Notes
• This command writes the service center address to non-volatile memory.
• The SMS service center address should be entered as specified by the service provider.
Test Command
AT+CSCA=?
Response(s)
OK
Read Command
AT+CSCA?
Response(s)
+CSCA: <sca>, <tosca>
OK
Write Command
AT+CSCA=<sca>[, <tosca>]
Response(s)
OK
PIN Last Reference(s)
+ + - 3GPP TS 27.005 [44]
To Next Page
Loading...
Need help?
General
