Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
9.13 AT+CSSN
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 220 of 513
9.13 AT+CSSN Supplementary service notifications
AT+CSSN enables or disables the presentation of URCs for supplementary services. 
Syntax

Unsolicited Result Codes
URC 1
+CSSI: <code 1>
When <n>=1 and a supplementary service notification is received after a mobile originated call setup, inter-
mediate result code "+CSSI: <code 1>" is sent to TE before any other MO call setup result codes
URC 2
+CSSU: <code 2>
When <m>=1 and a supplementary service notification is received during a mobile terminated call setup or
during a call, unsolicited result code "+CSSU: <code 2>" is sent to TE.

Parameter Description
0
(P)
Suppress "+CSSI" URCs
1 Activate "+CSSI" URCs
0
(P)
Suppress "+CSSU" URCs
1 Activate "+CSSU" URCs
0 Unconditional call forwarding is active
Test Command
AT+CSSN=?
Response(s)
+CSSN: (list of supported<n>s), (list of supported<m>s)
OK
Read Command
AT+CSSN?
Response(s)
+CSSN: <n>, <m>
OK
Write Command
AT+CSSN=<n>[, <m>]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN  Last Reference(s)
- - - 3GPP TS 27.007 [45]
<n>
(num)
<m>
(num)
<code 1>
(num)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English