Cinterion
®
EHS6 AT Command Set
6.5 AT^SPIC
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 130 of 513
6.5 AT^SPIC Display PIN counter
The AT^SPIC command can be used to find out whether the ME is waiting for a password and, if so, how many
attempts are left to enter the password.
The execute command returns the number of attempts still available for entering the currently required password,
for example the SIM PIN, SIM PUK, PH-SIM PIN etc.
The read command AT^SPIC? indicates which password the number of attempts stated by the execute com-
mand refers to. The write command may be used to query the counter for a specific password. It indicates the
number of attempts still available for entering the password identified by <facility>, for example the SIM PIN,
SIM PIN2, PH-SIM PIN etc. .
To check whether or not you need to enter a password use the read commands AT+CPIN?, AT+CPIN2? or
AT^SPIC? . If the response to AT+CPIN? is "READY" the counter of the execute command AT^SPIC relates to
PIN2. If the responses to AT+CPIN? and AT+CPIN2? both read "READY", the AT^SPIC execute and read com-
mands return only OK. The AT^SPIC write command returns the counter of the given <code>.
If no USIM card is inserted the AT^SPIC execute, read and write commands return only OK.
Syntax
Parameter Description
Number of attempts left to enter the currently required password. This number will be counted down after each
failure.
Test Command
AT^SPIC=?
Response(s)
OK
Read Command
AT^SPIC?
Response(s)
^SPIC: <code>
OK
Exec Command
AT^SPIC
Response(s)
[^SPIC: <counter>]
OK
Write Command
AT^SPIC=<facility>[, <pin_puk>]
Response(s)
^SPIC: <counter>
OK
ERROR
+CME ERROR: <err>
PIN Last
- + -
<counter>
(num)
To Next Page
Loading...
Need help?
General
