Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
2.10 AT+CMEE
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 44 of 513
Table 2.2: General "CME ERROR" Codes (proprietary)
Table 2.3: GPRS related "CME ERROR" Codes (3GPP TS 27.007)
50 Incorrect parameters
100 Unknown
256 operation temporary not allowed
257 call barred
261 SS not executed
500 CTS Handover on Progress
501 Cellular Protocol Stack Out of service state
502 CTS Unspecified Error
+CME <err> Code Text (if AT+CMEE=2)
615 network failure
616 network is down
639 service type not yet available
640 operation of service temporary not allowed
650 resolve host name failure
764 missing input value
765 invalid input value
767 operation failed
+CME <err> Code Text (if AT+CMEE=2)
103 illegal MS
106 illegal ME
107 GPRS services not allowed
111 PLMN not allowed
112 location area not allowed
113 roaming not allowed in this location area
132 service option not supported
133 requested service option not subscribed
134 service option temporary out of order
148 unspecified GPRS error
149 PDP authentication failure
150 invalid mobile class
151 Unassigned (unallocated) number
152 No route to destination
153 Channel unacceptable
154 Operator determined barring
155 Normal call clearing
156 User busy
157 No user responding
158 User alerting, no answer
+CME <err> Code Text (if AT+CMEE=2)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English