Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
11.19 AT^SGCONF
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 319 of 513
11.19 AT^SGCONF Configuration of GPRS related Parameters
AT^SGCONF configures the used E/GPRS Multislot Classes. Four Multislot Classes are supported for GPRS
respectively EGPRS. 
Syntax

Parameter Description
The maximum number of octets in an information field of Unnumbered (U) frames.
0
(P)
No negotiation with network (A fixed number of octets will be used).
The maximum number of octets in an information field of Combined Information (I) frames.
0
(P)
No negotiation with network (A fixed number of octets will be used).
GPRS Multislot Class. The value can be one of the classes indicated with the Test command.
8 GPRS Multislot Class 8
10 GPRS Multislot Class 10
11 GPRS Multislot Class 11
12
(D)
GPRS Multislot Class 12
Test Command
AT^SGCONF=?
Response(s)
^SGCONF: (list of supported <llc_pdu_length_U>s), (list of supported <llc_pdu_length_I>s), (list of
supported <GPRS msclass>es), (list of supported <EGPRS msclass>es), (list of supported
<msClassChangeMode>s)
OK
Read Command
AT^SGCONF?
Response(s)
^SGCONF: <llc_pdu_length_U>, <llc_pdu_length_I>, <GPRS msclass>, <EGPRS msclass>,
<msClassChangeMode>
OK
Write Command
AT^SGCONF=[<llc_pdu_length_U>][, [<llc_pdu_length_I>][, [<GPRS msclass>][, [<EGPRS
msclass>][, <msClassChangeMode>]]]]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN  Last
- + -
<llc_pdu_length_U>
(num)
<llc_pdu_length_I>
(num)
<GPRS msclass>
(num)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English