Gemalto Cinterion EHS6 - 12.19 AT^SMGL List Short Messages from preferred store without setting status to REC READ

Cinterion
®
EHS6 AT Command Set 
12.19 AT^SMGL
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 350 of 513
12.19 AT^SMGL List Short Messages from preferred store without set-
ting status to REC READ
The write command allows to select a status type and lists, from the message storage <mem1>, all messages
that currently have the specified <stat>. The major difference over the standard command AT+CMGL is that the
status of the listed messages remains u n c h a n g e d (unread remains unread).
The execute command is the same as the write command, but uses the given default of <stat>. 
Syntax

Notes
• The selected <mem1> can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs and SMS-
COMMANDs), the response may be a mix of the responses of different SM types. TE application can recog-
nize the response format by examining the third response parameter.
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in an error or a short delay before the requested AT command response
is returned.
Test Command
AT^SMGL=?
Response(s)
same as AT+CMGL
Exec Command
AT^SMGL
Response(s)
^SMGL: (For default values of <stat>, see "Section 12.1, SMS Parameters.)
OK
Write Command
AT^SMGL=<stat>
Response(s)
same as AT+CMGL
PIN  Last
+ + -