Gemalto Cinterion EHS6 - 18.7 AT^SRVCFG Service Configuration Settings

Cinterion
®
EHS6 AT Command Set 
18.7 AT^SRVCFG
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 438 of 513
18.7 AT^SRVCFG Service Configuration Settings
The AT^SRVCFG can be used to query and configure various settings of extra services supported by the EHS6. 
The AT^SRVCFG write command queries a configuration parameter (if no value is input) or sets its value(s). 
Input of parameter names is always coded in GSM character set. 
Syntax
Test Command
AT^SRVCFG=?
Response(s)
^SRVCFG: "CBL", "key", (max. string length of <CBLKey>s)
^SRVCFG: "CBL", "urc", (range of <CBLUrc>s)
^SRVCFG: "CBL", "city", (list of supported <CBLCity>s)
^SRVCFG: "CBL", "fallback", (list of supported <CBLFallback>s)
^SRVCFG: "CBL", "gps", (list of supported <CBLGps>s)
^SRVCFG: "CBL", "gps/latitude", (range of <CBLLatitude>s)
^SRVCFG: "CBL", "gps/longitude", (range of <CBLLongitude>s)
^SRVCFG: "CBL", "gps/hAcc", (range of <CBLHacc>s)
^SRVCFG: "CBL", "gps/posAge", (range of <CBLPosAge>s)
^SRVCFG: "CBL", "gps/elevation", (range of <CBLElevation>s)
^SRVCFG: "CBL", "gps/vaccurancy", (range of <CBLVaccurancy>s)
^SRVCFG: "CBL", "gps/heading", (range of <CBLHeading>s)
^SRVCFG: "CBL", "gps/speed", (range of <CBLSpeed>s)
^SRVCFG: "CBL", "wifi", (list of supported <CBLWifi>s)
^SRVCFG: "CBL", "wifi/bssid", (max. string length of <CBLBssid>s)
^SRVCFG: "CBL", "wifi/ssid", (max. string length of <CBLSsid>s)
^SRVCFG: "CBL", "wifi/rssid", (range of <CBLRssid>s)
OK
Write Command
Query/Configure COMBAIN key.
AT^SRVCFG="CBL", "key"[, <CBLKey>]
Response(s)
^SRVCFG: "CBL", "key", <CBLKey>
OK
ERROR
+CME ERROR: <err>
Write Command
Query/Configure the interval for automatically repeated location reporting via URC.
AT^SRVCFG="CBL", "urc" [, <CBLUrc>]
Response(s)
^SRVCFG: "CBL", "urc" , <CBLUrc>
OK
ERROR
+CME ERROR: <err>
Write Command
Query/Configure the City-Flag.
AT^SRVCFG="CBL", "city" [, <CBLCity>]
Response(s)
^SRVCFG: "CBL", "city" , <CBLCity>
OK