Cinterion
®
EHS6 AT Command Set
18.2 ATS3
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 425 of 513
18.2 ATS3 Command Line Termination
ATS3 is implemented for compatibility reasons only, and has no effect.
Syntax
Parameter Description
000...013
(&F)
...127
Notes
•Command ATS3 is dummy, and has no effect on module behavior.
• Read command will return value written by user or default value n=13.
• Write command will return OK or ERROR. OK - when parameter <n> is in range, ERROR otherwise.
• Despite OK returned in case of any parameter from range, no changes will be made.
• Parameter is volatile.
• If changing this setting the new value has no effect for "^SHUTDOWN" URC.
Read Command
ATS3?
Response(s)
<n>
OK
Write Command
ATS3=<n>
Response(s)
OK
ERROR
PIN Last Reference(s)
- + - ITU-T V.250 [16]
<n>
(num)(&V)(&W)
To Next Page
Loading...
