Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
2.10 AT+CMEE
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 42 of 513
2.10 AT+CMEE Error Message Format
AT+CMEE controls the format of error result codes that indicates errors related to EHS6 functionality. Format can
be selected between plain "ERROR" output, error numbers or verbose "+CME ERROR: <err>" and "+CMS
ERROR: <err>" messages. 
Possible error result codes are listed in Table 2.1, General "CME ERROR" Codes (3GPP TS 27.007), Table 2.2,
General "CME ERROR" Codes (proprietary), Table 2.3, GPRS related "CME ERROR" Codes (3GPP TS 27.007)
and Table 2.4, SMS related "CMS ERROR" Codes (3GPP TS 27.005). 
Syntax

Parameter Description
0
(&F)(D)
Disable result code, i.e. only "ERROR" will be displayed.
1 Enable error result code with numeric values.
2 Enable error result code with verbose (string) values.


Example 

To obtain enhanced error messages it is recommended to choose <errMode>=2.
Test Command
AT+CMEE=?
Response(s)
+CMEE: (list of supported<errMode>s)
OK
Read Command
AT+CMEE?
Response(s)
+CMEE: <errMode>
OK
Write Command
AT+CMEE=<errMode>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN  Last Reference(s)
- + - 3GPP TS 27.007 [45], 3GPP TS
27.005 [44]
<errMode>
(num)(&V)(&W)
AT+CMEE=2
OK

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English