Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
21.3 Availability of AT Commands Depending on Operating Mode of ME
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 494 of 513
21.3 Availability of AT Commands Depending on Operating Mode of ME
- ... AT command not supported
+ ... AT command supported
± ... AT command partially supported
See description of AT command for details.
Table 21.6: Availability of AT Commands Depending on Operating Mode of ME
AT Command Normal Mode


Configuration Commands
AT&F + +
AT&V + +
AT&W + +
ATQ + +
ATV + +
ATX + +
ATZ + +
AT+CFUN + +
AT^SMSO + +
AT+CMEE + +
AT+CSCS + +
AT^SCFG + ±
AT^SPOW + +

Status Control Commands
AT+CEER + +
AT^SIND + +
AT+CPAS + +

Serial Interface Control Commands
AT\Q + +
AT&C + +
AT&D + +
AT&S + +
ATE + +
AT+ICF + +
AT+IPR + +
AT+CMUX + +

Identification Commands
ATI + +
AT+CGMI + +
AT+CGMM + +
AT+CGMR + +

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English