Cinterion
®
EHS6 AT Command Set
10.1 AT^SICS
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 230 of 513
Notes
• Before opening a service profile based on a connection profile recently used, check with AT^SICI that the
previous connection was properly closed. If AT^SICI confirms that the connection profile is in <conState>
0 (Down) the connection profile may be used again.
• If a GPRS network does not support or is not correctly configured for automatic DNS address assignment the
TCP/IP stack cannot resolve fully qualified domain names. In this case, a warning message will be returned
when trying to open an Internet service configured for automatic DNS address assignment.
10.1.1 Example: GPRS connection profile
at^sics=0,conType,GPRS0
Select connection type GPRS0.
OK
AT^SICS=0,"inactTO", "20"
Inactivity timeout = 20s.
OK
AT^SICS=0,dns1,"193.254.160.1"
IP address of Primary DNS server.
OK
AT^SICS=0,passwd,t-d1
Password for GPRS services provided by the Ger-
man operator T-D1.
OK
AT^SICS=0,apn,"internet.t-d1.de"
APN to access the GPRS services provided by the
German operator T-D1.
OK
To Next Page
Loading...
Need help?
General
