Cinterion
®
EHS6 AT Command Set
1.7 Supported character sets
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 23 of 513
Table 1.5: Exemplary escape sequences generated by EHS6 for its non-UCS2 output
Usually terminal programs are not able to recognize escape sequences, and thus, handle them as normal char-
acters.
To prevent misinterpretation of control characters or special characters it is recommended to always use USC2
alphabet and PDU mode.
Character
Value
ASCII
Character
GSM
Character
UCS2
Character
Escape
Sequence
Numeric Escape
Sequence
0x5C \ Ö 00D6 \5C 0x5C 0x35 0x43
0x22 " " 0022 \22 0x5C 0x32 0x32
0x00 NULL @ n/a \00 0x5C 0x30 0x30
To Next Page
Loading...
Need help?
General
