Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
9.3 AT+CAOC
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 200 of 513
9.3 AT+CAOC Advice of Charge Information
AT+CAOC controls the Advice of Charge supplementary service function mode. 
Syntax

Unsolicited Result Code
+CCCM: <ccmValue>
If activated a URC is sent everytime the CCM value changes

Parameter Description
0 Query current <ccmValue> value.
1
(P)
Deactivate URC reporting of <ccmValue> value.
2 Activate URC reporting of <ccmValue> value.
Current value in hexadecimal format, e.g. "00001E" indicates decimal value 30). The three bytes are coded as
ACM
max
value on the USIM; for details refer to 3GPP TS 11.11 [17], 3GPP TS 31.101 [18], 3GPP TS 31.102 [19].
Test Command
AT+CAOC=?
Response(s)
+CAOC: (list of supported<Mode>s)
OK
Read Command
AT+CAOC?
Response(s)
+CAOC: <Mode>
OK
Exec Command
AT+CAOC
Response(s)
+CAOC: <ccmValue>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CAOC=[<Mode>]
Response(s)
If <Mode>=0, ME returns the current <ccmValue> value:
+CAOC: <ccmValue>
OK
ERROR
+CME ERROR: <err>
PIN  Last Reference(s)
+ + - 3GPP TS 27.007 [45]
<Mode>
(num)(&V)
<ccmValue>
(str)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English