Cinterion
®
EHS6 AT Command Set
1.9 Errors and Messages
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 30 of 513
1.9 Errors and Messages
The command result codes "+CME ERROR: <err>" and "+CMS ERROR: <err>" indicate errors related to mobile
equipment or network functionality.
The format of <err> can be either numeric or verbose and is selectable via AT+CMEE.
A result error code terminates the execution of the command and prevents the execution of all remaining com-
mands that may follow on the same command line. If so, neither "ERROR" nor "OK" result codes are returned
for these commands. A 30 seconds timeout will deliver "ERROR" when the input of a command is not complete.
Using the wrong command syntax may result in errors: For example, using the execute command syntax
although the command has no execute format, causes "ERROR" to be returned. Likewise, using the write com-
mand syntax although the command has no write format causes "+CME ERROR: <err>" to be returned.
See also:
• Section 2.10.1, CME/CMS Error Code Overview
• Section 2.5.1, Verbose and numeric result codes
• Section 3.1, AT+CEER
To Next Page
Loading...
Need help?
General
