Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
12.13 AT+CPMS
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 341 of 513
12.13 AT+CPMS Preferred SMS message storage
The write command selects memory storages <mem1>,<mem2>, <mem3> to be used for reading, writing, etc. 
Syntax

Parameter Description
Number of messages currently in <mem1>
Number of messages currently in <mem2>
Number of messages currently in <mem3>
Number of messages storable in <mem1>
Number of messages storable in <mem2>
Number of messages storable in <mem3>


Test Command
AT+CPMS=?
Response(s)
+CPMS: (list of supported <mem1>s), (list of supported <mem2>s), (list of supported <mem3>s)
OK
Read Command
AT+CPMS?
Response(s)
+CPMS: <mem1>, <used1>, <total1>, <mem2>, <used2>, <total2>, <mem3>, <used3>, <total3>
OK
ERROR
+CMS ERROR: <err>
Write Command
AT+CPMS=<mem1>[, <mem2>[, <mem3>]]
Response(s)
+CPMS: <used1>, <total1>, <used2>, <total2>, <used3>, <total3>
OK
ERROR
+CMS ERROR: <err>
PIN  Last Reference(s)
+ + - 3GPP TS 27.005 [44]
<used1>
(num)
<used2>
(num)
<used3>
(num)
<total1>
(num)
<total2>
(num)
<total3>
(num)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English