Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
8.9 AT+CTZR
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 178 of 513
8.9 AT+CTZR Time Zone Reporting
The AT+CTZR command enables and disables event reporting for changes of time zone and daylight saving time. 
If reporting is enabled the EHS6 returns unsolicited result codes whenever the time zone changes. 
Syntax

Unsolicited Result Codes
URC 1
+CTZV: <timezone>, <time>
The URC indicates that the time zone has changed.
URC 2
+CTZV: <dst>
The URC provides information on daylight saving time.
URC 3
+NITZINFO: <timezone_variance>, <time>
The URC provides information on daylight saving time.

Parameter Description
0
(P)
Disable event reporting by URCs
1 Enable time event reporting by URCs
Integer value indicating the time zone
Test Command
AT+CTZR=?
Response(s)
+CTZR:(list of supported <mode>s)
OK
Read Command
AT+CTZR?
Response(s)
+CTZR: <mode>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CTZR=<mode>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN  Last Reference(s)
- + - 3GPP TS 27.007 [45]
<mode>
(num)
<timezone>
(num)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English