Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
9.4 AT+CCUG
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 201 of 513
9.4 AT+CCUG Closed User Group
The AT+CCUG write command serves to activate or deactivate the explicit CUG invocation, to set the desired
index, and to specify if Preferential Group or Outgoing Access shall be suppressed. 

The AT+CCUG read command returns if the Explicit CUG invocation is activated (in parameter <n>), which CUG
<index> is chosen, and if Preferential Group or Outgoing Access is suppressed (in parameter <info>). 
Syntax

Parameter Description
Explicit CUG invocation options
0
(P)
Deactivate explicit CUG invocation
1 Activate explicit CUG invocation
0
(P)
...9 Explicit selection of CUG index
10 No index (preferred CUG taken from subscriber data)
State of the call
0
(P)
No information
Test Command
AT+CCUG=?
Response(s)
list of supported <n>, range of supported <index>, range of supported <info>
OK
ERROR
+CME ERROR: <err>
Read Command
AT+CCUG?
Response(s)
+CCUG:<n>, <index>, <info>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CCUG=[[<n>][, <index>][, <info>]]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN  Last Reference(s)
+ + - 3GPP TS 27.007 [45], 
3GPP TS 22.085 [32], 
3GPP TS 24.085
<n>
(num)
<index>
(num)
<info>
(num)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English