Gemalto Cinterion EHS6 - 18.3 ATS4 Response Formatting

Cinterion
®
EHS6 AT Command Set 
18.3 ATS4
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 426 of 513
18.3 ATS4 Response Formatting
ATS4 is implemented for compatibility reasons only, and has no effect. 
Syntax

Parameter Description
000...010
(&F)
...127


Notes
•Command ATS4 is dummy, and has no effect on module behavior.
• Read command will return value written by user or default value n=10.
• Write command will return OK or ERROR. OK - when parameter <n> is in range, ERROR otherwise.
• Despite OK returned in case of any parameter from range, no changes will be made.
• Parameter is volatile.
Read Command
ATS4?
Response(s)
<n>
OK
Write Command
ATS4=<n>
Response(s)
OK
ERROR
PIN  Last Reference(s)
- + - ITU-T V.250 [16]
<n>
(num)(&V)(&W)