Cinterion
®
EHS6 AT Command Set
10.15 Examples of how to Configure and Use Internet Service Profiles
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 273 of 513
10.15.9 Creating Transparent TCP Socket Client
10.15.10 Opening and Closing Transparent TCP Service
OK
AT^SISC=1
Close the service.
OK
AT^SISS=1,srvType,"Socket"
Select service type "Socket".
OK
AT^SISS=1,conId,1
Select connection profile 1.
OK
AT^SISS=1,address,"socktcp://
10.10.0.110:9996;etx;timer=200"
Specify server address. Add "etx" parameter to set
Transparent mode.
OK
AT^SISO=1
Open Transparent TCP service.
OK
^SISW: 1,1
URC indicates that Transparent TCP service is
ready.
at^sist=1
Open transparent access mode.
CONNECT
Service is ready to send or receive data.
Client is sending data, e.g Good Morning (not visible
in example).
Client types +++ to return to AT command mode
(+++ not visible in example).
OK
at^sisi=1
Check the service state of service profile 1.
^SISI: 1,4,0,16,16,0
Service is in state "Up" (4). 0 bytes received, 16
bytes sent and acknowledged.
OK
AT^SISO?
Check the service state of service profile 1.
^SISO: 0,""
^SISO:
1,"Socket",4,2,0,16,"10.10.0.200:1024","10.
10.0.108:65532"
Service is in state "Up" (4). Socket is assigned. 0
bytes received, 16 bytes sent. Local and remote IP
address are assigned.
^SISO: 2,""
^SISO: 3,""
^SISO: 4,""
^SISO: 5,""
^SISO: 6,""
^SISO: 7,""
^SISO: 8,""
^SISO: 9,""
OK
at^sici?
Check the state of the Internet connection profile.
^SICI: 0,2,1,"10.10.0.200"
Internet connection profile is in state "Up". Local IP
address is assigned.
OK
AT^SISC=1
Close the service.
OK
at^sisi=1
Check the service state of service profile 1.
^SISI: 1,2,0,0,0,0
Service profile 1 is in state "Allocated" (2).
OK
To Next Page
Loading...
Need help?
General
