Cinterion
®
EHS6 AT Command Set
11.16 ATA
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 315 of 513
11.16 ATA Manual acceptance of a network request for PDP context
activation
The V.250 ATA command may be used to accept a network request for a PDP context activation announced by
the unsolicited result codes "RING" or "+CRING: GPRS". EHS6 responds with CONNECT, enters V.250 online
data state and follows the same procedure as it would after having received a AT+CGANS=1 with no <L2P> or
<cid> values specified.
If you try to answer a request which is no longer present or which is already answered by another instance, NO
CARRIER is returned.
Syntax
Exec Command
ATA
Response(s)
CONNECT
NO CARRIER
PIN Last Reference(s)
+ - + 3GPP TS 27.007 [45]
To Next Page
Loading...
Need help?
General
