Gemalto Cinterion EHS6 - 5.5 AT+CGSN Request International Mobile Equipment Identity (IMEI); 5.6 AT+GSN Request International Mobile Equipment Identity (IMEI)

Cinterion
®
EHS6 AT Command Set 
5.5 AT+CGSN
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 117 of 513
5.5 AT+CGSN Request International Mobile Equipment Identity
(IMEI)
AT+CGSN delivers the International Mobile Equipment Identity (IMEI). Command is identical with: AT+GSN. 
Syntax

Parameter Description
International Mobile Equipment Identity (IMEI) identifying a mobile equipment used in the mobile network.
5.6 AT+GSN Request International Mobile Equipment Identity (IMEI)
AT+GSN delivers the International Mobile Equipment Identity (IMEI). Command is identical with AT+CGSN 
Syntax

Parameter Description
International Mobile Equipment Identity (IMEI) identifying a mobile equipment used in the mobile network.
Test Command
AT+CGSN=?
Response(s)
OK
Exec Command
AT+CGSN
Response(s)
<sn>
OK
PIN  Last Reference(s)
- + - 3GPP TS 27.007 [45]
<sn>
(str)
Test Command
AT+GSN=?
Response(s)
OK
Exec Command
AT+GSN
Response(s)
<sn>
OK
PIN  Last Reference(s)
- + - V.250
<sn>
(str)