Cinterion
®
EHS6 AT Command Set
3.1 AT+CEER
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 83 of 513
Parameter Description
Category given as one of the following strings:
"No report available"
"CC setup error"
"CC modification error"
"CC release"
"SM attach error"
"SM detach"
"SM activation error"
"SM deactivation"
"SS network error cause"
"SS network reject cause"
"SS network GSM cause"
Cause for last call release or error as number code. Sent by network or internally.
Verbose string containing the textual representation of the cause.
Numeric value indicating an SS Reject code.
0 Reset the extended error report to initial value.
3.1.1 Release causes for L3 Call Control (CC)
See also 3GPP TS 24.008 [40], section 10.5.4.11 "Cause". All values greater than 255 are internal values.
PIN Last Reference(s)
- + - 3GPP TS 27.007 [45]
3GPP TS 24.008 [40]
<category>
(str)
<cause>
(num)
<description>
(str)
<tag>
(num)
<reset>
(num)
<cause> <description>
Normal class
1 Unassigned (unallocated) number
3 No route to destination
6 Channel unacceptable
8 Operator determined barring
16 Normal call clearing
17 User busy
18 No user responding
19 User alerting, no answer
21 Call rejected
To Next Page
Loading...
Need help?
General
