Gemalto Cinterion EHS6 - 14.2 AT+STKPRO USAT Proactive Command URCs

Cinterion
®
EHS6 AT Command Set 
14.2 AT+STKPRO
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 359 of 513
14.2 AT+STKPRO USAT Proactive Command URCs
The AT+STKPRO test command returns the set of proactive commands supported. For each proactive command
there is a URC provided. 
Syntax

Unsolicited Result Codes
URC 1
Refresh
+STKPRO: 01, <CmdQualifier>
URC 2
Set up event list
+STKPRO: 05, <EventList>
URC 3
Set up call
+STKPRO: 16, <DialNumber>, <Subaddr>, <CmdQualifier>, <Alpha1>, <IconId1>,
<Alpha2>, <IconId2>
URC 4
Send SS
+STKPRO: 17, <SsData>, <Alpha>, <IconId>, <RefNumber>
URC 5
Send USSD
+STKPRO: 18, <Dcs>, <HexString>, <Alpha>, <IconId>, <RefNumber>
URC 6
Send SMS
+STKPRO: 19, <Alpha>, <IconId>, <RefNumber>
URC 7
Send DTMF
+STKPRO: 20, <Alpha>, <IconId>, <DtmfStr>
URC 8
Launch browser
+STKPRO: 21, <Url>, <Alpha>, <IconId>
Test Command
AT+STKPRO=?
Response(s)
+STKPRO:(list of supported <ProactCmd>s)
OK
PIN  Last
- + -