Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
14.2 AT+STKPRO
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 364 of 513
Item text string
URL that shall be loaded
Text string
Default item, see <ItemId>
Data coding scheme
String containing data in hexadecimal format
Maximum response length
Minimum response length
Next action
1 Circuit switched (currently not supported by EHS6)
2 Packet switched
3 Default (currently not supported by EHS6)
255 Invalid
Hex string containing detailed information dependent on the type.
The buffer the TE shall allocate for channel data.
Data coding scheme of the text string. Text strings may be coded in 7-bit, 8-bit or UCS2 (16-bit) for user authen-
tication data if requested by the bearer connection.
Specifies user authentication data if requested by the bearer connection. Coding based on <LoginDcs>.
<ItemText>
(num)
<Url>
(str)
<DefaultText>
(str)
<DefaultItem>
(str)
<Dcs>
(str)
<HexString>
(str)
<MaxRespLen>
(num)
<MinRespLen>
(num)
<NextAction>
(num)
<BearerType>
(num)
<BearerParam>
(num)
<BufSize>
(num)
<LoginDcs>
(str)
<LoginText>
(str)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English