Gemalto Cinterion EHS6 - Page 365

Cinterion
®
EHS6 AT Command Set 
14.2 AT+STKPRO
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 365 of 513
Data coding scheme of the text string. Text strings may be coded in 7-bit, 8-bit or UCS2 (16-bit) for user authen-
tication data if requested by the bearer connection.
Specifies user authentication data if requested by the bearer connection. Coding based on <PasswordDcs>.
Specifies the transport layer protocol of the UICC/TE connection.
1 UDP (as defined in RFC 768 [9])
2 TCP (as defined in RFC 793 [10]
255 No transport protocol specified
Specifies the port number.
Called party subaddress for CS bearers only
Type of destination address
33 IPv4 address
255 Invalid
Specifies the destination point of the connection. Hex string.
Specifies the id of BIP channel(1-7).
Specifies the data length that the user want to receive from a BIP channel. Hex string.
Specifies the data that the user want to send to a BIP channel. Hex string.
<PasswordDcs>
(str)
<PasswordText>
(str)
<TransportLevel>
(num)
<TransportPort>
(num)
<SubaddrCs>
(num)
<DestAddrType>
(num)
<DestAddr>
(str)
<ChannelID>
(num)
<ChannelDataLen>
(num)
<ChannelData>
(str)