Cinterion
®
EHS6 AT Command Set
7.4 ATD><n>
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 139 of 513
7.4 ATD><n> Mobile originated call from active memory using index
number
ATD><n> can be used to set up an outgoing call to the stored number. The termination character ";" shall be
added when a voice call is originated.
Syntax
Parameter Description
Integer type memory location in the range of locations available in the selected memory, i.e. the index number
returned by AT+CPBR.
String of GSM modifiers:
I Activates CLIR (disables presentation of own phone number to called party)
i Deactivates CLIR (enables presentation of own phone number to called party)
Note
• Parameter <mgsm> only if no *# code is within the dialing string.
Exec Command
ATD><n>[<mgsm>][;]
Response(s)
If successfully connected and non-voice call (ME switches to online data mode):
CONNECT <text>
If voice call and command input is completed:
OK
If no dialtone (parameter setting ATX3 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
NO ANSWER
ERROR
+CME ERROR: <err>
PIN Last Reference(s)
+ - - ITU-T V.250 [16]
<n>
(num)
<mgsm>
(str)
To Next Page
Loading...
Need help?
General
