Cinterion
®
EHS6 AT Command Set
12.17 AT+CSMP
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 346 of 513
12.17 AT+CSMP Set SMS Text Mode Parameters
AT+CSMP controls additional parameters needed when an SMS is sent to the network or placed in a storage if
text format message mode is selected.
It is possible to set the validity period starting from the time when the short message is received by the SMSC
(<vp> is in the range 0... 255) or define an absolute time for validity period termination (<vp> is a string). The
format of <vp> is given by <fo>. The enhanced validity period format is given as hexadecimal coded string (e.g.
<pdu>) with quotes.
Syntax
Parameter Description
First Octet
Depending on the command or result code: First octet of 3GPP TS 23.040 [36] SMS-DELIVER, SMS-SUBMIT,
SMS-STATUS-REPORT, or SMS-COMMAND in integer format.
0...17
(P)
...255
Validity Period
Depending on SMS-SUBMIT <fo> setting: 3GPP TS 23.040 [36] TP-Validity-Period either in integer format or
in time-string format (refer <dt>).
0...167
(D)
...255
Protocol Identifier
3GPP TS 23.040 [36] TP-Protocol-Identifier in integer format.
0
(P)
...255
Test Command
AT+CSMP=?
Response(s)
OK
Read Command
AT+CSMP?
Response(s)
+CSMP:<fo>, <vp>/ <scts>, <pid>, <dcs>
OK
Write Command
AT+CSMP=<fo>, <vp>/<scts>[, <pid>[, <dcs>]]
Response(s)
OK
ERROR
+CMS ERROR: <err>
PIN Last Reference(s)
+ + - 3GPP TS 27.005 [44]
<fo>
(num)
<vp>
(num)(NV)
<pid>
(num)
To Next Page
Loading...
Need help?
General
