Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
12.18 AT+CSMS
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 348 of 513
12.18 AT+CSMS Select Message Service
Syntax

Parameter Description
0
(&F)(D)
3GPP TS 23.040 [36] and 3GPP TS 23.041 [37] (the syntax of SMS AT com-
mands is compatible with 3GPP TS 27.005 [44] Phase 2 version 4.7.0; Phase
2+ features which do not require new command syntax may be supported, e.g.
correct routing of messages with new Phase 2+ data coding schemes)
1 3GPP TS 23.040 [36] and 3GPP TS 23.041 [37] (the syntax of SMS AT com-
mands is compatible with 3GPP TS 27.005 [44] Phase 2+ version; the require-
ment of <service> setting 1 is mentioned under corresponding command
descriptions).
Mobile Terminated Messages:
0 Type not supported
1
(P)
Type supported
Mobile Originated Messages:
0 Type not supported
1
(P)
Type supported
Test Command
AT+CSMS=?
Response(s)
+CSMS: (list of supported<service>s)
OK
Read Command
AT+CSMS?
Response(s)
+CSMS: <service>, <mt>, <mo>, <bm>
OK
Write Command
AT+CSMS=<service>
Response(s)
+CSMS: <mt>, <mo>, <bm>
OK
ERROR
+CMS ERROR: <err>
PIN  Last Reference(s)
+ + - 3GPP TS 27.005 [44]
<service>
(num)(&V)(&W)
<mt>
(num)(&V)
<mo>
(num)(&V)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English