Gemalto Cinterion EHS6 - 10.11 AT^SISH Disconnect Remote Client

Cinterion
®
EHS6 AT Command Set 
10.11 AT^SISH
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 258 of 513
10.11 AT^SISH Disconnect Remote Client
AT^SISH is intendend only for a Transparent TCP Listener service. It allows to disconnect an established client
connection from server side. 
Syntax

Parameter Description
0...9 A Transparent TCP Listener service <srvProfileId> defined with
AT^SISS.
Specifies disconnect mode.
[0] Socket is closed with graceful option
1 Socket is closed without graceful option
Test Command
AT^SISH=?
Response(s)
OK
Write Command
AT^SISH=<srvProfileId>[, <mode>]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN  Last
- - -
<srvProfileId>
(num)
<mode>
(num)