Gemalto Cinterion EHS6 - Page 236

Cinterion
®
EHS6 AT Command Set 
10.4 AT^SISS
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 236 of 513
Syntax

Parameter Description
Internet service profile identifier.
The <srvProfileId> is used to reference all parameters related to the same service profile. Furthermore,
when using the AT commands AT^SISO, AT^SISR, AT^SISW, AT^SIST, AT^SISH and AT^SISC the
<srvProfileId> is needed to select a specific service profile.
0...9
Internet service profile parameter.
srvType Type of Internet service to be configured with consecutive usage of AT^SISS. 
For supported values of <srvParmValue> refer to <srvParmValue-srv-
Type>.
user User name string for FTP, HTTP, SMTP authentication.
Parameter is optional: The user name can be set by <srvParmTag> parame-
ter "user" and/or as part of "address" parameter. If set in both parameters at
the same time, only the one given in the "address" parameter will be used,
ignoring the one given in <srvParmTag> parameter "user".
For HTTP only simple authentication is supported. Length: 32 octects
passwd Password string for FTP, HTTP, SMTP authentication. 
Parameter is optional: The password can be set by <srvParmTag> parameter
"passwd" and/or as part of the "address" parameter. If set in both parameters
at the same time, only the one given in the "address" parameter will be used,
ignoring the one given in <srvParmTag> parameter "passwd". 
Length: 32 octects
conId Internet connection profile to be used, for details refer AT^SICS.
Test Command
AT^SISS=?
Response(s)
OK
Read Command
AT^SISS?
Response(s)
^SISS: <srvProfileId>, <srvParmTag>, <srvParmValue>
[^SISS: ...]
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SISS=<srvProfileId>, <srvParmTag>, <srvParmValue>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN  Last
- + -
<srvProfileId>
(num)
<srvParmTag>
(u)