Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
14.5 AT+STKCC
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 374 of 513
14.5 AT+STKCC USAT Call Control Notification
The +STKCC URC reports the status call control activities: 
Unsolicited Result Codes
URC 1
Reported activity: Set up call
+STKCC: 1, <ResVal>, <Alpha>, <PhoneNumber>, <NumberType>
URC 2
Reported activity: Send Supplementary Service commmand
+STKCC: 2, <ResVal>, <Alpha>, <SsCode>
URC 3
Reported activity: Send USSD commmand
+STKCC: 3, <ResVal>, <Alpha>, <UssdCode>
URC 4
Reported activity: Send short message
+STKCC: 4, <ResVal>, <Alpha>, <ToSca>, <Sca>, <ToRa>, <Ra>

Parameter Description
Call control result value
0 Allowed
1 Not allowed
2 Allowed, with modification
254 USAT busy (status word SW=x9300)
Optional information provided by the USIM as text string
Called party phone number
0...255 Type of number (ton) and numbering plan identifier (npi), e.g. 129 for national
number, 145 for international number
Supplementary Service code
USSD code
<ResVal>
(num)
<Alpha>
(num)
<PhoneNumber>
(str)
<NumberType>
(num)
<SsCode>
(str)
<UssdCode>
(str)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English