Cinterion
®
EHS6 AT Command Set
1. Introduction
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 12 of 513
1. Introduction
1.1 Scope of the document
This document presents the AT Command Set for
EHS6 GSM/UMTS Mobile Engine, Release 03.001.
Before using the EHS6 or upgrading to a new firmware version please read the latest product information pro-
vided in "EHS6 Release Notes, Version 03.001".
More information is available at http://m2m.gemalto.com/
.
DISCLAIMER:
AT commands or parameters not documented in this document are subject to change and reserved for future
use. Gemalto M2M GmbH reserves the right to modify or even eliminate these options in later releases.
To Next Page
Loading...
Need help?
General
