Cinterion
®
EHS6 AT Command Set
18. Miscellaneous Commands
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 424 of 513
18. Miscellaneous Commands
The AT Commands described in this chapter are related to various areas.
18.1 A/ Repeat Previous Command Line
Repeat previous AT command line.
In general, after beginning a command line with character "a" or "A" a second character "t", "T" or "/" has to follow.
"/" acts as line terminating character. In case of using a wrong second character, it is necessary to start again
with character "a" or "A".
Syntax
Exec Command
A/
Response(s)
PIN Last Reference(s)
- + - V.250
To Next Page
Loading...
