Gemalto Cinterion EHS6 - 15.4 AT+CPBW Write into Phonebook

Cinterion
®
EHS6 AT Command Set 
15.4 AT+CPBW
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 386 of 513
15.4 AT+CPBW Write into Phonebook
The AT+CPBW write command can be used to create, edit and delete a phonebook entry at a <location> of
the active storage selected with AT+CPBS. 

The AT+CPBW test command returns the location range supported by the current storage, the maximum length
of the <number> field, the range of supported <type> values and the maximum length of the <text> field.
Note: The maximum <number> length may differ depending on USIM card, nevertheless <nlength> always
presents the maximum possible value. In case of exceeding available number length, "+CME ERROR: Memory
full" message is returned and the phonebook entry is not stored. 
Syntax

Parameter Description
Location number within phonebook memory. The maximum range supported by each storage type is indicated
in the test command response. If <location> is not given, the first free entry will be used.
If <location> is given as the only parameter, the phonebook entry specified by <location> is deleted.
Phone number in format specified by <type>. Parameter must be present, although it may be an empty string.
Alphabetic characters are not permitted. The <number> may contain dialstring modifiers "*", "#", "+" or "p".
However please note that entries containing *# codes cannot be stored together with international access code.
For example, a dial string such as *31#+48123456789 can be dialed only by using the ATD command.
If other printable non-alphabetic characters are used the entry needs to be saved with <type>=209. Otherwise,
if <type>=209 is not used any non-digit characters other than "*", "#", "+" or "p" will be removed from the string
and only accepted modifiers from the GSM alphabet will be saved.
Test Command
AT+CPBW=?
Response(s)
+CPBW: (1-<maxloc>), <nlength>, (list of supported <type>s), <tlength>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CPBW=[<location>][, <number>[[, <type>][, <text>]]]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN  Last Reference(s)
+ + - 3GPP TS 27.007 [45],
3GPP TS 24.008 [40],
3GPP TS 11.11 [17], 3GPP TS
31.101 [18], 3GPP TS 31.102 [19]
<location>
(num)
<number>
(str)