Cinterion
®
EHS6 AT Command Set
12.15 AT+CSCB
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 344 of 513
12.15 AT+CSCB Select Cell Broadcast Message Indication
The test command returns the supported modes as a compound value.
The write command selects which types of CBMs are to be received by the ME.
Syntax
Parameter Description
Message mode
0
(P)
Accept messages that are defined in <mids> and <dcss>
1 Forbid messages that are defined in <mids> and <dcss>
Cell Broadcast Message ID specification
0...65534 Range of CBM identifiers
[““]
(P)
Default value of this parameter is an empty string to indicate that no CBM iden-
tifiers are specified.
All different possible combinations of CBM IDs (e.g. "0,1,5,320-478,922,2000-3000").
In certain configurations, e.g. if using SIMs that contain data in Elementary File EF-CBMI (Cell Broadcast Mes-
sage Identifier) less than six combinations may be available.
To access a SIM's Elementary File data refer to command AT+CRSM.
CBM data coding scheme specification
[““]
(P)
Default value of this parameter is empty string
All different possible combinations of CBM data coding schemes (e.g. "0-3,5"). Using default empty string leads
to get all CBMs independent of their dcss.
A given <dcss> replaces any former value and is used for consecutive requests.
Test Command
AT+CSCB=?
Response(s)
+CSCB: (list of supported <mode>s)
OK
Read Command
AT+CSCB?
Response(s)
+CSCB: <mode>, <mids>, <dcss>
OK
Write Command
AT+CSCB=<mode>[, <mids>[, <dcss>]]
Response(s)
OK
PIN Last Reference(s)
+ + - 3GPP TS 27.005 [44]
<mode>
(num)
<mids>
(str)
<dcss>
(str)
To Next Page
Loading...
Need help?
General
