Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
14.2 AT+STKPRO
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 363 of 513
06 Error / special information
07 Call waiting tone
08 Ringing tone
10 General beep
11 Positive acknowledgement tone
12 Negative acknowledgement or error tone
Time duration in number of time units
0 Indicates a non-existing duration object
1...255 Multiples of <TimeUnit>
0 Minutes
1 Seconds
2 Tenth of seconds
Defines the duration when an idle connection is released automatically. If not present, the ME never shall
release a connection automatically.
0 Indicates a non-existing duration object
1...255 Multiples of <IdleUnit>
0 Minutes
1 Seconds
2 Tenth of seconds
A duration for reconnect tries. The interval specifies the time interval of the duration in multiples of the reconnect
time unit used.
0 Indicates a non-existing duration object
1...255 Multiples of <ReconTimeUnit>
0 Minutes
1 Seconds
2 Tenth of seconds
Total items
Item identifier (see 3GPP TS 11.14 [21], 3GPP TS 31.111 [22], ETSI TS 102 223 [23])
<Interval>
(num)
<TimeUnit>
(num)
<IdleInterval>
(num)
<IdleUnit>
(num)
<ReconInterval>
(num)
<ReconTimeUnit>
(num)
<TotalItems>
(num)
<ItemId>
(num)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English