Cinterion
®
EHS6 AT Command Set
9.4 AT+CCUG
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 202 of 513
1 Suppress outgoing access
2 Suppress preferential CUG
3 Suppress preferential CUG and Outgoing Access.
Notes
• The active settings for omitted parameters are retained without changes.
• Explicit CUG invocation means that at each call setup, CUG information is added to the called number.
• When starting a call with ATD, Parameter 'G' or 'g' of command ATD will have no effect if the option selected
for this single call is identical to the option already selected with AT+CCUG.
• Current settings are saved in the ME automatically.
• ATZ or AT&F do not influence the current settings.
• Some combinations of parameters may lead to rejection of CUG calls by the network. For more information,
please consult 3GPP TS 24.085.
To Next Page
Loading...
Need help?
General
