Cinterion
®
EHS6 AT Command Set
1.8 Unsolicited Result Code Presentation
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 29 of 513
URC 3
+PBREADY
After SIM PIN authentication has completed this URC indicates that the ME has completed reading data from
the SIM and that phonebook and SMS functions are ready for read and write operation.
Any attempt to use phonebook or SIM PIN dependent SMS AT commands before the ME has finished reading
SIM data will be denied with error codes, such as "+CME ERROR: SIM busy" or "+CMS ERROR: SIM busy".
URC 4
^SYSINFO: <info>
System information URC.
URC 5
^SBC: Undervoltage Warning
Supply voltage is close to the defined undervoltage threshold.
URC 6
^SBC: Undervoltage Shutdown
Undervoltage threshold exceeded. ME automatically switches off.
URC 7
^SBC: Overvoltage Warning
Supply voltage is close to defined overvoltage threshold.
URC 8
^SBC: Overvoltage Shutdown
Overvoltage threshold exceeded. ME automatically switches off.
To Next Page
Loading...
Need help?
General
