EasyManuals Logo

Gemalto Cinterion EHS6 User Manual

Gemalto Cinterion EHS6
513 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #443 background imageLoading...
Page #443 background image
Cinterion
®
EHS6 AT Command Set
18.7 AT^SRVCFG
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 443 of 513
Age of the GPS entity
This parameter specifies the age of the position in seconds. The value serves as a criteria for the availabilty of
the GPS entity. If this parameter is older than 600s, the GPS entity would be omitted automatically. This param-
eter is mandatory for the GPS entity. Its default value is empty (""). The value can be modified only when
<CBLGps> is 0.
Note that this parameter will be reset to "0", after the GPS entity has been used.
0...65535 A valid age of position
““
(D)
The age is not set
The altitude of the GPS entity
This parameter specifies the altitude of the GPS entity in meters. Its default value is empty (""). The value can
be modified only when <CBLGps> is 0.
Note that this parameter will be reset to "0", after the GPS entity has been used.
0...65535 A valid altitude for GPS location
““
(D)
The altitude is not set
The accuracy of the altitude
This parameter specifies the altitude accuracy for the GPS locoation in meters. Its default value is empty ("").
The value can be modified only when <CBLGps> is 0.
Note that this parameter will be reset to "0", after the GPS entity has been used.
0...65535 A valid accuracy of altitude for GPS location
““
(D)
The accuracy of altitude is not set
The direction of movement
This parameter specifies the direction of movement of the GPS entity. Its default value is empty (""). The value
can be modified only when <CBLGps> is 0.
Note that this parameter will be reset to "0", after the GPS entity has been used.
0...65535 A valid direction for GPS location
““
(D)
The direction is not set
The speed of movement
This parameter specifies the speed of the GPS entity in m/s. Its default value is empty (""). The value can be
modified only when <CBLGps> is 0.
Note that this parameter will be reset to "0", after the GPS entity has been used.
0...65535 A valid speed for GPS location
““
(D)
The speed is not set
<CBLPosAge>
(str)(NV)
<CBLElevation>
(str)(NV)
<CBLVaccurancy>
(str)(NV)
<CBLHeading>
(str)(NV)
<CBLSpeed>
(str)(NV)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gemalto Cinterion EHS6 and is the answer not in the manual?

Gemalto Cinterion EHS6 Specifications

General IconGeneral
BrandGemalto
ModelCinterion EHS6
CategoryControl Unit
LanguageEnglish

Related product manuals