Cinterion
®
EHS6 AT Command Set
2.10 AT+CMEE
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 45 of 513
159 Call rejected
160 Number changed
161 Non selected user clearing
162 Destination out of order
163 Invalid number format (incomplete number)
164 Facility rejected
165 Response to STATUS ENQUIRY
166 Normal, unspecified
167 No circuit/channel available
168 Network out of order
169 Temporary failure
170 Switching equipment congestion
171 Access information discarded
172 requested circuit/channel not available
173 Resources unavailable, unspecified
174 Quality of service unavailable
175 Requested facility not subscribed
176 Incoming calls barred within the CUG
177 Bearer capability not authorized
178 Bearer capability not presently available
179 Service or option not available, unspecified
180 Bearer service not implemented
181 ACM equal to or greater than ACMmax
182 Requested facility not implemented
183 Only restr. digital information bearer capability
184 Service or option not implemented, unspecified
185 Invalid transaction identifier value
186 User not member of CUG
187 Incompatible destination
188 Invalid transit network selection
189 Semantically incorrect message
190 Invalid mandatory information
191 Message type non-existent or not implemented
192 Message type not compatible with protocol state
193 Information element non-existent or not implemented
194 Conditional IE error
195 Message not compatible with protocol state
196 Recovery on timer expiry
197 Protocol error, unspecified
198 Interworking, unspecified
199 Number not allowed
+CME <err> Code Text (if AT+CMEE=2)
To Next Page
Loading...
Need help?
General
