Cinterion
®
EHS6 AT Command Set
17.1 AT^SJAM
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 411 of 513
Parameter Description
The parameter controls the use of the Java Midlet
0 Install Midlet given by <midlet-url>
1 Start Midlet given by <midlet-url>
2 Stop Midlet given by <midlet-url>
3 Remove Midlet given by <midlet-url>
4 List installed Midlet(s)
5 List running Midlet(s)
URL of the Java application
The application name must be given as a fully qualified pathname (a:/.../...) to the jad or jar file containing the
desired application.
The local flash file system is identified by: A:. Directory separator is ''/'' (002Fh).
Examples:
AT^SJAM=1,"a:/java/jam/HelloUniverse.jad","sms_pw"
AT^SJAM=1,"a:/HelloUniverse.jad",""
Midlet name
Midlet vendor
Version of the Java Midlet
size of the Java Midlet Suite
Size in bytes occupied by the midlet in FFS
size of all records stores of Java Midlet
Size in bytes occupied by all record stores of the midlet in FFS
Autostart property of the Java Midlet as defined in the jad or jar file. Detailed explanations can be found in [3].
The autostart capability set in the Java Midlet(s) also depends on the global command AT^SCFG "Userware/
Autostart". If AT^SCFG "Userware/Autostart" is enabled then all Java Midlets with active <midlet-auto-
start> property will start automatically when the ME is powered up.
0 Autostart is not active for the specific <midlet-url>
1 Autostart is active for specific <midlet-url>
<action>
(num)
<midlet-url>
(str)
<midlet-name>
(str)
<midlet-vendor>
(str)
<midlet-version>
(str)
<midlet-suite-size>
(num)
<record-store-size>
(num)
<midlet-autostart>
(num)
To Next Page
Loading...
Need help?
General
