Cinterion
®
EHS6 AT Command Set
7.2 ATD
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 136 of 513
Notes
• <mgsm> is not supported for data calls.
• <n> is default for last number that can be dialed by ATDL.
• See also ATX for <text>.
• Parameter 'G' or 'g' will be ignored if Closed User Group was already activated, respectively deactivated with
AT+CCUG command before. Call by call invocation of CUG uses the settings provisioned by the provider or,
if available, the settings of the parameters <index> and <info> made with AT+CCUG.
• Emergency calls:
If no SIM is inserted, call numbers 000, 08, 110, 112, 118,119, 911 and 999 cause an emergency call setup.
If a SIM with ECC file is inserted, 112 and 911 and all additional call numbers stored in the ECC file cause an
emergency call setup.
If a SIM without or empty ECC file is inserted, call numbers 112 and 911 and in addition all call numbers spec-
ified with AT^SCFG, "Call/ECC", parameter <ecc> will cause an emergency call setup.
To Next Page
Loading...
Need help?
General
