Cinterion
®
EHS6 AT Command Set
9.8 AT+CLIP
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 212 of 513
String type phone number of calling address in format specified by <type>.
Type of address octet as defined by 3GPP TS 24.008 [40], subclause 10.5.4.7. For possible values see the
<type> parameters specified for phonebook related AT commands, for example AT+CPBR and AT+CPBW.
145 International access code
161 National number
128 Number is restricted
129 Otherwise
String type alphanumeric representation of <number> corresponding to the entry found in phonebook; used
character set is the one selected with AT+CSCS.
0 CLI valid
1 CLI has been withheld by the originator.
2 CLI is not available due to interworking problems or limitations of originating
network. <number> shall be an empty string ("") and <type> value will not be
significant.
When CLI is not available ( <CLI validity>=2), <number> shall be an empty string ("") and <type> value
will not be significant. Nevertheless, ME shall return the recommended value 128 for <type> (TON/NPI
unknown in accordance with 3GPP TS 24.008 [40], subclause 10.5.4.7).
When CLI has been withheld by the originator, (<CLI validity>=1) and the CLIP is provisioned with the
"override category" option (refer 3GPP TS 22.081 [29] and 3GPP TS 23.081), <number> and <type> is pro-
vided. Otherwise, ME shall return the same setting for <number> and <type> as if the CLI was not available.
<number>
(str)
<type>
(num)
<alpha>
(str)
<CLI validity>
(num)
To Next Page
Loading...
Need help?
General
