Intermec Antares 2420 - Page 8

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
nuggetf
code39
viii
Using RF Communications on the T2425s 4-18
Planning the Network Connection 4-18
Configuring the DCS 300 4-19
Configuring the Access Point 4-19
Configuring the T2425 4-20
Defining the RF Network Parameters 4-20
Using the Icons to Monitor RF Communications 4-22
Using the T2425 Between Access Points 4-24
Configuring the T2425 Over the Network 4-25
Configuring the T2425 From the DCS 300 4-25
Configuring the T2425 From the Host 4-26
Configuring the T2425 in a UDP Plus Network 4-26
Configuring the T2425 in a TCP/IP Direct Connect Network 4-28
Transferring Files in a TCP/IP Direct Connect Network 4-31
About Network Connectivity and Protocols 4-36
Using Custom Applications
How To Download and Run Applications 5-3
About the TRAKKER Antares Programmable Terminals 5-4
Creating Applications for the Terminal 5-6
Using the PSK or EZBuilder to Develop Applications 5-6
Converting Applications Between JANUS and TRAKKER Antares 5-7
Converting IRL Programs 5-7
Converting the Application to a Binary File 5-8
Using the Serial Port to Transfer Applications and Files 5-9
Using the DCS 300 to Download Applications 5-12
Copying Files to the DCS 300 5-12
Downloading Applications and Files to the T2425 5-14
Running the Application on the Terminal 5-17
Using Screen Mapping (DCS 300 v1.1) 5-20
5