Intermec Antares 2420 - Page 9

nuggetf
code39
Contents
ix
Troubleshooting
How to Use This Chapter 6-3
Finding and Solving Problems 6-4
Terminal Will Not Turn On 6-5
Problems While Operating the Terminal 6-5
Problems While Configuring the Terminal 6-8
T2425 Will Not Communicate With RF Network Devices 6-13
Problems Transmitting Data Through the Serial Port 6-15
Problems Transmitting Data Through the DCS 300 6-16
Bar Code Labels Will Not Scan 6-17
Guidelines for Managing Batteries 6-19
Booting and Resetting the Terminal 6-21
Booting the Terminal 6-21
Booting the Terminal on Resume 6-21
Using the Boot Menu 6-22
Resetting the Terminal 6-22
Maintaining and Cleaning the Terminal 6-24
Replacing the Antenna 6-24
Cleaning the Scan Module Window and Terminal Screen 6-26
Running Diagnostics
What Diagnostics Are Available? 7-3
Running Diagnostics From the Menu System 7-4
Defining the Diagnostics Screens 7-7
Defining the Software Diagnostics Screens 7-7
Application Events 7-7
Clear Task Profiles 7-8
Error Logger 7-8
Task Status 7-9
Defining the Hardware Diagnostics Screens 7-10
Battery/PIC Status 7-10
Beeper Test 7-11
Destructive RAM Test 7-12
Display Test 7-13
Hardware Configuration 7-14
Keypad Test 7-15
Radio Test 7-16
6
7