Keysight x-series User Reference Guide

9 Strip Chart Measurement
Measurement Commands for Strip Chart
The following commands are used to retrieve the measurement results:
Remote Command
:MEASure|READ|FETCh:SCHart[1]|2?
Example MEAS:SCH?
FETCH:SCH?
READ:SCH?
606 EMI Receiver Mode Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)